 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOS FET Relays New High-capacity MOS FET Relays Allowing Switching of a 1.25-A Continuous Load Current with a 80-V Load Voltage. * Continuous load current of 1,250 mA. * Dielectric strength of 1,500 Vrms between I/O. G3VM-81HR Application Examples * Broadband systems * Measurement devices * Data loggers * Amusement machines Note: The actual product is marked differently from the image shown here. List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 80 VAC Model G3VM-81HR G3VM-81HR(TR) Number per stick 75 --Number per tape --2,500 Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-81HR 4.40.25 6.30.25 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 2.540.25 0.10.1 0.40.1 0.60.3 7.00.4 Weight: 0.13 g Terminal Arrangement/Internal Connections (Top View) G3VM-81HR 6 5 4 1 2 3 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-81HR 6 to 6.3 1.2 0.8 2.54 2.54 Tel:0755-83003780 64 Fax:0755-83003794 www.andiantech.com G3VM-81HR Absolute Maximum Ratings (Ta = 25C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Output dielectric strength Continuous load current ON current reduction rate Connection temperature Dielectric strength between input and output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Symbol IF IFP D IF/C VR Tj VOFF IO D ION/C Tj VI-O Ta Tstg --Rating 50 1 -0.5 5 125 80 1,250 -12.5 125 1,500 -20 to +85 -40 to +125 260 Unit mA A mA/C V C V mA mA/C C Vrms C C C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta 25C 100 ms pulses, 100 pps Ta 25C Measurement Conditions G3VM-81HR Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Electrical Characteristics (Ta = 25C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Current leakage when the relay is open Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time Symbol VF IR CT IFT RON ILEAK CI-O RI-O tON tOFF Minimum 1.0 ------------1,000 ----Typical 1.15 --15 2 0.11 1.2 0.8 --2.0 0.7 Maximum 1.3 10 --5 0.15 1.5 ----3.0 1.0 V mA pF mA W nA pF MW ms ms Unit Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IO = 1,250 mA IF = 5 mA, IO = 1,250 mA VOFF = 20 V, Ta = 50C f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH 60% IF = 5 mA, RL = 200 W, VDD = 20 V (See note 2.) VOUT IF Note: 2. Turn-ON and Turn-OFF Times IF 1 2 6 4 RL VDD VOUT 10% tON 90% tOFF Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Output dielectric strength Operating LED forward current Continuous load current Operating temperature Symbol VDD IF IO Ta --5 --25 Minimum --------Typical 64 30 1,250 60 Maximum V mA mA C Unit Engineering Data Load Current vs. Ambient Temperature G3VM-81HR Load current (mA) 1,500 Safety Precautions Refer to page 6 for precautions common to all G3VM models. 1,250 1,000 750 500 250 0 -20 0 20 40 60 80 100 Ambient temperature (C) Tel:0755-83003780 Fax:0755-83003794 www.andiantech.com 65 |
Price & Availability of G3VM-81HRTR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |